OS X - Eclipse - WindowBuilder -> “Incompatible Java versionsâ€
No matter what I do, Eclipse keeps saying that "Eclipse is running under 1.6, but this Java project has a 1.7 Java compliance level, so WindowBuilder will not be able to load classes from this project. Ues a lower level of Java for the project, or run Eclipse using a newer Java version."
I spent two hours on this, so before I throw everything out, I thought I should ask you guys.
The system is an iMac with a 10.8.5 OS X.
Installed JDK 7 from Oracle. (java -version shows the version as 7.)
If I print it with Java, it prints 7.
Modified Eclipse settings (Compiler) to 7.
Used override in project settings to make it 7.
Modified eclipse.ini file so the -vm points to 7.
I'm out of ideas and patience. Both.
Update #1: System Preferences shows Java 7 as well.
macos java eclipse jdk
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |Â
No matter what I do, Eclipse keeps saying that "Eclipse is running under 1.6, but this Java project has a 1.7 Java compliance level, so WindowBuilder will not be able to load classes from this project. Ues a lower level of Java for the project, or run Eclipse using a newer Java version."
I spent two hours on this, so before I throw everything out, I thought I should ask you guys.
The system is an iMac with a 10.8.5 OS X.
Installed JDK 7 from Oracle. (java -version shows the version as 7.)
If I print it with Java, it prints 7.
Modified Eclipse settings (Compiler) to 7.
Used override in project settings to make it 7.
Modified eclipse.ini file so the -vm points to 7.
I'm out of ideas and patience. Both.
Update #1: System Preferences shows Java 7 as well.
macos java eclipse jdk
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43
add a comment |Â
No matter what I do, Eclipse keeps saying that "Eclipse is running under 1.6, but this Java project has a 1.7 Java compliance level, so WindowBuilder will not be able to load classes from this project. Ues a lower level of Java for the project, or run Eclipse using a newer Java version."
I spent two hours on this, so before I throw everything out, I thought I should ask you guys.
The system is an iMac with a 10.8.5 OS X.
Installed JDK 7 from Oracle. (java -version shows the version as 7.)
If I print it with Java, it prints 7.
Modified Eclipse settings (Compiler) to 7.
Used override in project settings to make it 7.
Modified eclipse.ini file so the -vm points to 7.
I'm out of ideas and patience. Both.
Update #1: System Preferences shows Java 7 as well.
macos java eclipse jdk
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
No matter what I do, Eclipse keeps saying that "Eclipse is running under 1.6, but this Java project has a 1.7 Java compliance level, so WindowBuilder will not be able to load classes from this project. Ues a lower level of Java for the project, or run Eclipse using a newer Java version."
I spent two hours on this, so before I throw everything out, I thought I should ask you guys.
The system is an iMac with a 10.8.5 OS X.
Installed JDK 7 from Oracle. (java -version shows the version as 7.)
If I print it with Java, it prints 7.
Modified Eclipse settings (Compiler) to 7.
Used override in project settings to make it 7.
Modified eclipse.ini file so the -vm points to 7.
I'm out of ideas and patience. Both.
Update #1: System Preferences shows Java 7 as well.
macos java eclipse jdk
macos java eclipse jdk
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
edited Oct 18 '13 at 10:37
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
asked Oct 18 '13 at 10:30
Shiki
12.6k1782141
12.6k1782141
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43
add a comment |Â
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43
add a comment |Â
2 Answers
2
active
oldest
votes
I had this exact problem. Below is how I solved it.
It looks like more work than it really is. If I accidentally deleted a step trying to format all this text, let me know.
First, on your Mac, you should find the "default Java from Apple" residing at: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
From the Eclipse menu: Eclipse> Preferences> Java> Installed JRE's>
- CLICK "Add.."
- SELECT "Mac OS X VM"
- CLICK "Next.."
In the 'JRE Definition dialog' that comes up,
- SELECT "Directory.." next to JRE Home,
- DRILL DOWN and SELECT /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/.
Finish filling out what is needed, and then,
- SELECT java 1.6 in Eclipse> Preferences> Java> Installed JRE's>
- SELECT Eclipse> Preferences> Java> Installed JRE's> Execution Environment>.
- CLICK on "JavaSE-1.6",
and make sure that your Java 1.6 Runtime you just set up is checked.
RIGHT CLICK on your project folder in the workbench to open your projects properties, and double-check that Java 1.6 is good to go under the "Java Compiler" menu and sub-menu's.
While still in your project's properties dialog:
- CLICK "Run/Debug Settings"
- SELECT your project's name,
- CLICK "Edit.."
In the resulting dialog, 'Edit launch configuration properties':
- CLICK the "JRE" tab and ensure it's Java 1.6
- SELECT the "Classpath" tab and double check that it also is including Java 1.6
In the 'Project Explorer' tab, within your project, find the "JRE System Library" amongst your project's folders. Make sure it say's Java 1.6
if NOT:
- RIGHT CLICK it
- SELECT "Properties"
- CHECK MARK "Execution Environment", and in the drop down menu, SELECT JavaSE-1.6
RE-START eclipse
I'll confess, it is late and I'm hurrying, so changing every reference from 1.7 to 1.6 I have it working as I write this. In fact, I JUST got it working, so am sharing this before I get at it!
The BELOW step I also did. In my case, I was running Indigo 3.7 on Mac Mavericks. If the above still isn't working, this is the other thing I added in my situation.
- RIGHT CLICK your actual Eclipse icon
- SELECT the "Show Contents" menu item.
- OPEN the "Contents/" folder
OPEN the "MacOS/" folder- OPEN "eclipse.ini" in a text editor.
ABOVE the line that says "-vm" (without the quotes)
ADD the line: -vm /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
This starts eclipse with Java 1.6, rather than the Java 1.7 that is now default on your system. Obviously, you need to re-start eclipse after editing it's .ini file.
answered Dec 19 '13 at 5:15
Nick Sardo
113
add a comment |Â
Simple steps
step-1
go to the eclipse window--> preference-->java--> compiler (serach java) we can get the compilercompliance level as let say 1.7
step-2
chek the java version in the command prompt
$ java -version
get the below message
java version "1.6.0_35"
OpenJDK Runtime Environment (IcedTea6 1.13.7) (6b35-1.13.7-1ubuntu0.12.04.2)
OpenJDK Server VM (build 23.25-b01, mixed mode)
so u can see the java version is mismatch
so open the eclipse.ini from the folder exist in the eclipse installable folder/
append the jdk version
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.200.v20140116-2212
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
answered Jul 26 '15 at 16:35
Amitav Swain
11
add a comment |Â
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I had this exact problem. Below is how I solved it.
It looks like more work than it really is. If I accidentally deleted a step trying to format all this text, let me know.
First, on your Mac, you should find the "default Java from Apple" residing at: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
From the Eclipse menu: Eclipse> Preferences> Java> Installed JRE's>
- CLICK "Add.."
- SELECT "Mac OS X VM"
- CLICK "Next.."
In the 'JRE Definition dialog' that comes up,
- SELECT "Directory.." next to JRE Home,
- DRILL DOWN and SELECT /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/.
Finish filling out what is needed, and then,
- SELECT java 1.6 in Eclipse> Preferences> Java> Installed JRE's>
- SELECT Eclipse> Preferences> Java> Installed JRE's> Execution Environment>.
- CLICK on "JavaSE-1.6",
and make sure that your Java 1.6 Runtime you just set up is checked.
RIGHT CLICK on your project folder in the workbench to open your projects properties, and double-check that Java 1.6 is good to go under the "Java Compiler" menu and sub-menu's.
While still in your project's properties dialog:
- CLICK "Run/Debug Settings"
- SELECT your project's name,
- CLICK "Edit.."
In the resulting dialog, 'Edit launch configuration properties':
- CLICK the "JRE" tab and ensure it's Java 1.6
- SELECT the "Classpath" tab and double check that it also is including Java 1.6
In the 'Project Explorer' tab, within your project, find the "JRE System Library" amongst your project's folders. Make sure it say's Java 1.6
if NOT:
- RIGHT CLICK it
- SELECT "Properties"
- CHECK MARK "Execution Environment", and in the drop down menu, SELECT JavaSE-1.6
RE-START eclipse
I'll confess, it is late and I'm hurrying, so changing every reference from 1.7 to 1.6 I have it working as I write this. In fact, I JUST got it working, so am sharing this before I get at it!
The BELOW step I also did. In my case, I was running Indigo 3.7 on Mac Mavericks. If the above still isn't working, this is the other thing I added in my situation.
- RIGHT CLICK your actual Eclipse icon
- SELECT the "Show Contents" menu item.
- OPEN the "Contents/" folder
OPEN the "MacOS/" folder- OPEN "eclipse.ini" in a text editor.
ABOVE the line that says "-vm" (without the quotes)
ADD the line: -vm /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
This starts eclipse with Java 1.6, rather than the Java 1.7 that is now default on your system. Obviously, you need to re-start eclipse after editing it's .ini file.
answered Dec 19 '13 at 5:15
Nick Sardo
113
add a comment |Â
I had this exact problem. Below is how I solved it.
It looks like more work than it really is. If I accidentally deleted a step trying to format all this text, let me know.
First, on your Mac, you should find the "default Java from Apple" residing at: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
From the Eclipse menu: Eclipse> Preferences> Java> Installed JRE's>
- CLICK "Add.."
- SELECT "Mac OS X VM"
- CLICK "Next.."
In the 'JRE Definition dialog' that comes up,
- SELECT "Directory.." next to JRE Home,
- DRILL DOWN and SELECT /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/.
Finish filling out what is needed, and then,
- SELECT java 1.6 in Eclipse> Preferences> Java> Installed JRE's>
- SELECT Eclipse> Preferences> Java> Installed JRE's> Execution Environment>.
- CLICK on "JavaSE-1.6",
and make sure that your Java 1.6 Runtime you just set up is checked.
RIGHT CLICK on your project folder in the workbench to open your projects properties, and double-check that Java 1.6 is good to go under the "Java Compiler" menu and sub-menu's.
While still in your project's properties dialog:
- CLICK "Run/Debug Settings"
- SELECT your project's name,
- CLICK "Edit.."
In the resulting dialog, 'Edit launch configuration properties':
- CLICK the "JRE" tab and ensure it's Java 1.6
- SELECT the "Classpath" tab and double check that it also is including Java 1.6
In the 'Project Explorer' tab, within your project, find the "JRE System Library" amongst your project's folders. Make sure it say's Java 1.6
if NOT:
- RIGHT CLICK it
- SELECT "Properties"
- CHECK MARK "Execution Environment", and in the drop down menu, SELECT JavaSE-1.6
RE-START eclipse
I'll confess, it is late and I'm hurrying, so changing every reference from 1.7 to 1.6 I have it working as I write this. In fact, I JUST got it working, so am sharing this before I get at it!
The BELOW step I also did. In my case, I was running Indigo 3.7 on Mac Mavericks. If the above still isn't working, this is the other thing I added in my situation.
- RIGHT CLICK your actual Eclipse icon
- SELECT the "Show Contents" menu item.
- OPEN the "Contents/" folder
OPEN the "MacOS/" folder- OPEN "eclipse.ini" in a text editor.
ABOVE the line that says "-vm" (without the quotes)
ADD the line: -vm /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
This starts eclipse with Java 1.6, rather than the Java 1.7 that is now default on your system. Obviously, you need to re-start eclipse after editing it's .ini file.
answered Dec 19 '13 at 5:15
Nick Sardo
113
add a comment |Â
I had this exact problem. Below is how I solved it.
It looks like more work than it really is. If I accidentally deleted a step trying to format all this text, let me know.
First, on your Mac, you should find the "default Java from Apple" residing at: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
From the Eclipse menu: Eclipse> Preferences> Java> Installed JRE's>
- CLICK "Add.."
- SELECT "Mac OS X VM"
- CLICK "Next.."
In the 'JRE Definition dialog' that comes up,
- SELECT "Directory.." next to JRE Home,
- DRILL DOWN and SELECT /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/.
Finish filling out what is needed, and then,
- SELECT java 1.6 in Eclipse> Preferences> Java> Installed JRE's>
- SELECT Eclipse> Preferences> Java> Installed JRE's> Execution Environment>.
- CLICK on "JavaSE-1.6",
and make sure that your Java 1.6 Runtime you just set up is checked.
RIGHT CLICK on your project folder in the workbench to open your projects properties, and double-check that Java 1.6 is good to go under the "Java Compiler" menu and sub-menu's.
While still in your project's properties dialog:
- CLICK "Run/Debug Settings"
- SELECT your project's name,
- CLICK "Edit.."
In the resulting dialog, 'Edit launch configuration properties':
- CLICK the "JRE" tab and ensure it's Java 1.6
- SELECT the "Classpath" tab and double check that it also is including Java 1.6
In the 'Project Explorer' tab, within your project, find the "JRE System Library" amongst your project's folders. Make sure it say's Java 1.6
if NOT:
- RIGHT CLICK it
- SELECT "Properties"
- CHECK MARK "Execution Environment", and in the drop down menu, SELECT JavaSE-1.6
RE-START eclipse
I'll confess, it is late and I'm hurrying, so changing every reference from 1.7 to 1.6 I have it working as I write this. In fact, I JUST got it working, so am sharing this before I get at it!
The BELOW step I also did. In my case, I was running Indigo 3.7 on Mac Mavericks. If the above still isn't working, this is the other thing I added in my situation.
- RIGHT CLICK your actual Eclipse icon
- SELECT the "Show Contents" menu item.
- OPEN the "Contents/" folder
OPEN the "MacOS/" folder- OPEN "eclipse.ini" in a text editor.
ABOVE the line that says "-vm" (without the quotes)
ADD the line: -vm /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
This starts eclipse with Java 1.6, rather than the Java 1.7 that is now default on your system. Obviously, you need to re-start eclipse after editing it's .ini file.
answered Dec 19 '13 at 5:15
Nick Sardo
113
I had this exact problem. Below is how I solved it.
It looks like more work than it really is. If I accidentally deleted a step trying to format all this text, let me know.
First, on your Mac, you should find the "default Java from Apple" residing at: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
From the Eclipse menu: Eclipse> Preferences> Java> Installed JRE's>
- CLICK "Add.."
- SELECT "Mac OS X VM"
- CLICK "Next.."
In the 'JRE Definition dialog' that comes up,
- SELECT "Directory.." next to JRE Home,
- DRILL DOWN and SELECT /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/.
Finish filling out what is needed, and then,
- SELECT java 1.6 in Eclipse> Preferences> Java> Installed JRE's>
- SELECT Eclipse> Preferences> Java> Installed JRE's> Execution Environment>.
- CLICK on "JavaSE-1.6",
and make sure that your Java 1.6 Runtime you just set up is checked.
RIGHT CLICK on your project folder in the workbench to open your projects properties, and double-check that Java 1.6 is good to go under the "Java Compiler" menu and sub-menu's.
While still in your project's properties dialog:
- CLICK "Run/Debug Settings"
- SELECT your project's name,
- CLICK "Edit.."
In the resulting dialog, 'Edit launch configuration properties':
- CLICK the "JRE" tab and ensure it's Java 1.6
- SELECT the "Classpath" tab and double check that it also is including Java 1.6
In the 'Project Explorer' tab, within your project, find the "JRE System Library" amongst your project's folders. Make sure it say's Java 1.6
if NOT:
- RIGHT CLICK it
- SELECT "Properties"
- CHECK MARK "Execution Environment", and in the drop down menu, SELECT JavaSE-1.6
RE-START eclipse
I'll confess, it is late and I'm hurrying, so changing every reference from 1.7 to 1.6 I have it working as I write this. In fact, I JUST got it working, so am sharing this before I get at it!
The BELOW step I also did. In my case, I was running Indigo 3.7 on Mac Mavericks. If the above still isn't working, this is the other thing I added in my situation.
- RIGHT CLICK your actual Eclipse icon
- SELECT the "Show Contents" menu item.
- OPEN the "Contents/" folder
OPEN the "MacOS/" folder- OPEN "eclipse.ini" in a text editor.
ABOVE the line that says "-vm" (without the quotes)
ADD the line: -vm /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
This starts eclipse with Java 1.6, rather than the Java 1.7 that is now default on your system. Obviously, you need to re-start eclipse after editing it's .ini file.
answered Dec 19 '13 at 5:15
Nick Sardo
113
answered Dec 19 '13 at 5:15
Nick Sardo
113
answered Dec 19 '13 at 5:15
Nick Sardo
113
answered Dec 19 '13 at 5:15
Nick Sardo
113
113
add a comment |Â
add a comment |Â
Simple steps
step-1
go to the eclipse window--> preference-->java--> compiler (serach java) we can get the compilercompliance level as let say 1.7
step-2
chek the java version in the command prompt
$ java -version
get the below message
java version "1.6.0_35"
OpenJDK Runtime Environment (IcedTea6 1.13.7) (6b35-1.13.7-1ubuntu0.12.04.2)
OpenJDK Server VM (build 23.25-b01, mixed mode)
so u can see the java version is mismatch
so open the eclipse.ini from the folder exist in the eclipse installable folder/
append the jdk version
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.200.v20140116-2212
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
answered Jul 26 '15 at 16:35
Amitav Swain
11
add a comment |Â
Simple steps
step-1
go to the eclipse window--> preference-->java--> compiler (serach java) we can get the compilercompliance level as let say 1.7
step-2
chek the java version in the command prompt
$ java -version
get the below message
java version "1.6.0_35"
OpenJDK Runtime Environment (IcedTea6 1.13.7) (6b35-1.13.7-1ubuntu0.12.04.2)
OpenJDK Server VM (build 23.25-b01, mixed mode)
so u can see the java version is mismatch
so open the eclipse.ini from the folder exist in the eclipse installable folder/
append the jdk version
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.200.v20140116-2212
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
answered Jul 26 '15 at 16:35
Amitav Swain
11
add a comment |Â
Simple steps
step-1
go to the eclipse window--> preference-->java--> compiler (serach java) we can get the compilercompliance level as let say 1.7
step-2
chek the java version in the command prompt
$ java -version
get the below message
java version "1.6.0_35"
OpenJDK Runtime Environment (IcedTea6 1.13.7) (6b35-1.13.7-1ubuntu0.12.04.2)
OpenJDK Server VM (build 23.25-b01, mixed mode)
so u can see the java version is mismatch
so open the eclipse.ini from the folder exist in the eclipse installable folder/
append the jdk version
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.200.v20140116-2212
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
answered Jul 26 '15 at 16:35
Amitav Swain
11
Simple steps
step-1
go to the eclipse window--> preference-->java--> compiler (serach java) we can get the compilercompliance level as let say 1.7
step-2
chek the java version in the command prompt
$ java -version
get the below message
java version "1.6.0_35"
OpenJDK Runtime Environment (IcedTea6 1.13.7) (6b35-1.13.7-1ubuntu0.12.04.2)
OpenJDK Server VM (build 23.25-b01, mixed mode)
so u can see the java version is mismatch
so open the eclipse.ini from the folder exist in the eclipse installable folder/
append the jdk version
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.200.v20140116-2212
-product
org.eclipse.epp.package.standard.product
--launcher.defaultAction
openFile
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
--launcher.defaultAction
openFile
--launcher.appendVmargs
-vm
/usr/lib/jvm/java-7-openjdk-i386/bin/java
-vmargs
-Dosgi.requiredJavaVersion=1.6
-XX:MaxPermSize=256m
-Xms40m
-Xmx512m
answered Jul 26 '15 at 16:35
Amitav Swain
11
answered Jul 26 '15 at 16:35
Amitav Swain
11
answered Jul 26 '15 at 16:35
Amitav Swain
11
answered Jul 26 '15 at 16:35
Amitav Swain
11
11
add a comment |Â
add a comment |Â
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f661718%2fos-x-eclipse-windowbuilder-incompatible-java-versions%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What is your JAVA_HOME set to?
– Avis
Oct 19 '13 at 3:58
To the new JDK. In the end I spent another few hours to install / remove eclipse workspaces, import project, install plugins and blah blah. In the end I made it work by launching the latest install from cli. But again, I don't know what worked.
– Shiki
Oct 19 '13 at 11:21
Which Eclipse are you use? Helios, Juno or Kepler?
– herry
Dec 19 '13 at 6:43