Unable to read float value from a PLC address
2
#!/usr/bin/env python
from pymodbus.constants import Endian
from pymodbus.payload import BinaryPayloadDecoder
from pymodbus.payload import BinaryPayloadBuilder
from pymodbus.client.sync import ModbusTcpClient
import struct
import logging
logging.basicConfig()
log = logging.getLogger()
log.setLevel(logging.INFO)
ip_address = "192.168.1.55"
client = ModbusTcpClient(ip_address)
if client.connect(): # connection is OK
# write float
#builder = BinaryPayloadBuilder(endian=Endian.Little)
#builder.add_32bit_float(77.77)
#payload = builder.build()
#result = client.write_registers(1, payload, skip_encode=True)
# read floats
result = client.read_holding_registers(28, 2)
decoder = BinaryPayloadDecoder.fromRegisters(result.registers,
endian=Endian.Big)
print str(decoder.decode_32bit_float())
client.close()
var1 = str(decoder.decode_32bit_float())
I m using PyModbus library to read float values from a PLC . I m getting right value from str(decoder.decode_32bit_float()) but failed to put it into a variable var1. It shows error (in decode 32 bit float return unpack(string, handle)[0] struct.error: unpack requires a string argument of length 4).
Thanks in advance
python plc pymodbus
edited Nov 15 '18 at 15:12
Cheche
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
add a comment |
2
#!/usr/bin/env python
from pymodbus.constants import Endian
from pymodbus.payload import BinaryPayloadDecoder
from pymodbus.payload import BinaryPayloadBuilder
from pymodbus.client.sync import ModbusTcpClient
import struct
import logging
logging.basicConfig()
log = logging.getLogger()
log.setLevel(logging.INFO)
ip_address = "192.168.1.55"
client = ModbusTcpClient(ip_address)
if client.connect(): # connection is OK
# write float
#builder = BinaryPayloadBuilder(endian=Endian.Little)
#builder.add_32bit_float(77.77)
#payload = builder.build()
#result = client.write_registers(1, payload, skip_encode=True)
# read floats
result = client.read_holding_registers(28, 2)
decoder = BinaryPayloadDecoder.fromRegisters(result.registers,
endian=Endian.Big)
print str(decoder.decode_32bit_float())
client.close()
var1 = str(decoder.decode_32bit_float())
I m using PyModbus library to read float values from a PLC . I m getting right value from str(decoder.decode_32bit_float()) but failed to put it into a variable var1. It shows error (in decode 32 bit float return unpack(string, handle)[0] struct.error: unpack requires a string argument of length 4).
Thanks in advance
python plc pymodbus
edited Nov 15 '18 at 15:12
Cheche
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
2
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Tryvar1 = decoder.decode_32bit_float()first , thenprint(var1)- dont use str unless you need a string.
– Patrick Artner
Nov 15 '18 at 11:41
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03
add a comment |
2
2
2
1
#!/usr/bin/env python
from pymodbus.constants import Endian
from pymodbus.payload import BinaryPayloadDecoder
from pymodbus.payload import BinaryPayloadBuilder
from pymodbus.client.sync import ModbusTcpClient
import struct
import logging
logging.basicConfig()
log = logging.getLogger()
log.setLevel(logging.INFO)
ip_address = "192.168.1.55"
client = ModbusTcpClient(ip_address)
if client.connect(): # connection is OK
# write float
#builder = BinaryPayloadBuilder(endian=Endian.Little)
#builder.add_32bit_float(77.77)
#payload = builder.build()
#result = client.write_registers(1, payload, skip_encode=True)
# read floats
result = client.read_holding_registers(28, 2)
decoder = BinaryPayloadDecoder.fromRegisters(result.registers,
endian=Endian.Big)
print str(decoder.decode_32bit_float())
client.close()
var1 = str(decoder.decode_32bit_float())
I m using PyModbus library to read float values from a PLC . I m getting right value from str(decoder.decode_32bit_float()) but failed to put it into a variable var1. It shows error (in decode 32 bit float return unpack(string, handle)[0] struct.error: unpack requires a string argument of length 4).
Thanks in advance
python plc pymodbus
edited Nov 15 '18 at 15:12
Cheche
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
#!/usr/bin/env python
from pymodbus.constants import Endian
from pymodbus.payload import BinaryPayloadDecoder
from pymodbus.payload import BinaryPayloadBuilder
from pymodbus.client.sync import ModbusTcpClient
import struct
import logging
logging.basicConfig()
log = logging.getLogger()
log.setLevel(logging.INFO)
ip_address = "192.168.1.55"
client = ModbusTcpClient(ip_address)
if client.connect(): # connection is OK
# write float
#builder = BinaryPayloadBuilder(endian=Endian.Little)
#builder.add_32bit_float(77.77)
#payload = builder.build()
#result = client.write_registers(1, payload, skip_encode=True)
# read floats
result = client.read_holding_registers(28, 2)
decoder = BinaryPayloadDecoder.fromRegisters(result.registers,
endian=Endian.Big)
print str(decoder.decode_32bit_float())
client.close()
var1 = str(decoder.decode_32bit_float())
I m using PyModbus library to read float values from a PLC . I m getting right value from str(decoder.decode_32bit_float()) but failed to put it into a variable var1. It shows error (in decode 32 bit float return unpack(string, handle)[0] struct.error: unpack requires a string argument of length 4).
Thanks in advance
python plc pymodbus
python plc pymodbus
edited Nov 15 '18 at 15:12
Cheche
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
edited Nov 15 '18 at 15:12
Cheche
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
edited Nov 15 '18 at 15:12
Cheche
815218
edited Nov 15 '18 at 15:12
Cheche
815218
edited Nov 15 '18 at 15:12
Cheche
815218
815218
asked Nov 15 '18 at 11:38
R-TR-T
456
asked Nov 15 '18 at 11:38
R-TR-T
456
asked Nov 15 '18 at 11:38
R-TR-T
456
456
2
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Tryvar1 = decoder.decode_32bit_float()first , thenprint(var1)- dont use str unless you need a string.
– Patrick Artner
Nov 15 '18 at 11:41
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03
add a comment |
2
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Tryvar1 = decoder.decode_32bit_float()first , thenprint(var1)- dont use str unless you need a string.
– Patrick Artner
Nov 15 '18 at 11:41
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03
2
2
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Try
var1 = decoder.decode_32bit_float() first , then print(var1) - dont use str unless you need a string.– Patrick Artner
Nov 15 '18 at 11:41
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Try
var1 = decoder.decode_32bit_float() first , then print(var1) - dont use str unless you need a string.– Patrick Artner
Nov 15 '18 at 11:41
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53318657%2funable-to-read-float-value-from-a-plc-address%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
draft saved
draft discarded
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53318657%2funable-to-read-float-value-from-a-plc-address%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
ever worked with streams? when you read a stream - f.e. by printing its str(). it is empty afterward because you are past the data in it ... unless more data comes in its empty and can not deliver more. Try
var1 = decoder.decode_32bit_float()first , thenprint(var1)- dont use str unless you need a string.– Patrick Artner
Nov 15 '18 at 11:41
Thanks Patrick it worked i really appreciate it Thanks
– R-T
Nov 15 '18 at 11:44
Thought so :) maybe delete it before it gets too many downvotes. Its the same for filestreams etc - once you read from it you are past the data you just read. Or selfanswer
– Patrick Artner
Nov 15 '18 at 11:51
@R-T Check this POST, I hope would help you up
– Benyamin Jafari
Nov 15 '18 at 22:03